What's in the box:
1 gate
1 spanner
1 spanner
4 double sided sticky pads
4 plastic disks
4 wall plugs
4 screws
4 rubber ended bolts with nuts
The gate was quite easy to fit, I fitted it in place with the plastic cups on the door frame, drew around the cups with a pencil, removed the gate then put a dot through the centre hole in all four cups to mark where to drill. I then drilled 4 holes, attached the sticky pads to the wall, fitted the plastic cups to the sticky pads then screwed them in.
All I had to do then was put the gate in place making sure all four rubber pads fitted into the plastic disks already attached then adjust the nuts until the pressure was correct and the gap closed on the handle.
I then gave it a good old push and shove to make sure it didn't move, hey presto, even if Liv manages to escape her cot she shouldn't be able to escape her room!
For more details and to explore the full range please visit www.lindam.com or like the Facebook page: Lindam UK
Disclaimer - I received this gate for the purpose of the review, however all opinion is my own.
No comments:
Post a Comment